How to Choose the Best LED Mirror for Indian Bathrooms in 2026
We make LED mirrors for a living, and the question we get asked most is some version of "which one should I buy?" Usually the person has four tabs open, every listing looks the same, and half the specs that matter are missing.
So here is the short version of what actually matters, and what to ask before you pay.
1. Size, before anything else
Get this wrong and nothing else rescues the mirror.
The rule we give everyone: your mirror should be 2 to 4 inches narrower than the counter below it. A 24 inch basin takes a 20 to 24 inch mirror. A 36 inch double vanity takes something around 32 to 36.
For height, put the top edge at roughly 5 to 6 feet off the floor. That covers most families without anyone tilting their head.
Rough sizes by bathroom:
- Small, 30 to 50 sq ft: 18×24 or 24×24 inch
- Standard, 50 to 80 sq ft: 24×36 or 30×36 inch
- Master, 80+ sq ft: 36×48 inch and up
If nothing standard fits your wall, we cut to size anyway, from 6 inches to 120.
2. CRI is the spec nobody mentions
CRI stands for Colour Rendering Index. It scores light from 0 to 100 on how honestly it shows colour compared to sunlight.
Low CRI light is why makeup can look right at the mirror and wrong the moment you step outside. The light was lying to you.
Anything at 80 is passable. At 90 and above your face looks the way it does in daylight, which is the entire job of a bathroom mirror. Film and studio lighting sits in that range, and it is what we put in everything we build.
If a listing does not print a CRI number, assume it is low. More on how to check it in our guide to CRI in LED lights.
3. IP rating, because Indian bathrooms are wet
This is where cheap mirrors die, usually somewhere between month six and month twelve. Moisture creeps into the driver, the strip flickers, then one half goes dark and stays dark.
IP44 is the floor for an Indian bathroom. It means splashes from any direction cannot get in. IP65 handles jets of water and is worth having if the shower is close to the mirror. Anything beyond that is more than a bathroom will ever need.
A seller who will not tell you the IP rating is telling you something.
4. Front-lit, backlit or edge-lit
Where the LEDs sit changes what the mirror is good for.
Front-lit puts the light on the face of the glass, pointing at you. This is the one you want if you actually use the mirror for shaving, skincare or makeup.
Backlit hides the strip behind the glass so the light spills onto the wall. It looks wonderful. It is not enough light to shave by.
Edge-lit runs the light through the edge of the glass. Subtle and clean, somewhere between the other two.
Most people end up happiest with front-lit plus a dimmer, or a combination unit if the budget stretches.
5. Get the dimmer
Colour temperature is measured in Kelvin. 2700K to 3000K is warm and yellow, good late at night. 4000K is neutral and suits most of the day. 6000K is cool and blue-white, the one to switch to for detailed makeup.
A three-in-one touch dimmer gives you all of them. It costs a little more, and it is the feature customers mention to us most often a year later.
6. Anti-fog
A demister is a thin heating pad stuck to the back of the glass. It warms a patch of mirror just enough that steam will not settle there.
Worth it if you take hot showers in a cold city. Delhi, Bengaluru, Pune, anywhere in the hills. In Mumbai or Chennai you will use it a few weeks a year.
7. Smart mirrors
Bluetooth speakers, clocks, voice control. They have got good, and they have got cheaper.
Buy one if you are redoing the whole bathroom and want it to feel finished. Skip it if you would rather own fewer things that can fail in year four. Both are sensible positions.
8. What things cost in 2026
- ₹2,000 to ₹4,000. No CRI figure, no IP rating, no dimmer. Fine for a guest bathroom nobody uses.
- ₹4,000 to ₹8,000. The sensible middle. Ours starts here, at CRI 90+.
- ₹8,000 to ₹15,000. Dimmer, colour temperature, anti-fog. Where most homes should be looking.
- ₹15,000 and up. Smart features, larger glass, custom sizes.
Price on its own tells you very little. Ask for the CRI number, the IP rating and the warranty length, then compare those. Full breakdown in our LED mirror price guide for India.
9. Ask what happens in year three
One year is the minimum anyone offers. Anything serious is three to five.
But the number on the page is not the useful part. The useful question is what actually happens when a strip fails in year three. Who comes, what it costs you, how long it takes. We give five years and answer on WhatsApp from Delhi. Put the same question to anyone else and see how straight the answer comes back.
10. Installation
The mirror needs power. If you are renovating, have the electrician run a 5-amp line to the spot before the tiles go up. If the wall is already done, surface conduit is the tidy way out.
Mounting hardware should be in the box. Ours is, along with the template and the guide. Most people are finished inside half an hour.
One last thing
We build in Delhi rather than import, so the mirrors are sealed for Indian humidity and sized for Indian bathrooms instead of adapted from a European catalogue. About 75,000 people have bought one so far.
If you are stuck between two options, message us and describe your bathroom. It is quicker than guessing.
Frequently asked
What size LED mirror suits an Indian bathroom?
For a standard 50 to 80 sq ft bathroom, 24×36 or 30×36 inch. Keep it 2 to 4 inches narrower than the counter. We cut anything from 6 to 120 inches if none of that fits.
Front-lit or backlit?
Front-lit if you use the mirror. Backlit if you want the room to look good. A combination gives you both, and for most Indian homes front-lit with a dimmer is the practical pick.
How much should I spend?
₹4,000 to ₹15,000 gets you CRI 90+, a proper IP rating and a dimmer. Ours start at ₹3,999.
Can I get a custom size?
Yes, any size from 6 to 120 inches and any shape. WhatsApp us on +91 93155 67847.